kitchen
knives
hunters
bowies
and daggers
tactical
utility
folding
knives
straight
Razors
4 1/2" Steak Knife Set
Type/ Style: Drop point steak knive with tapered tang. 4 1/2" Blade, 4 1/2" Cutting Edge, 8 1/2" OAL.
Blade: CPM-154, flat ground, convex cutting edge, 1000 grit finish, hardness 59 Rc.
Handle Material: Mammoth ivory (at least 10,000 years old).
Fasteners/ pins: 14 carat gold, peened and polished.
Storage Box: Highly figured walnut, lacquer finished by furniture maker and knife maker Devin Bliss. Engraved escutcheon by Wes Griffin.
Made For: Mrs and Mr Larry Alman, Little Rock, AR. Completed February, 2018.
8" Chef’s Knife
Type/ Style: French Profile drop point Chef’s knife, 8" cutting edge, 13" OAL.
Blade: Damasteel© SS Damascus Munin pattern, flat ground , hidden tang with convex cutting edge.
Handle Material: Ancient Mammoth Ivory, Mortised to fit hidden tang.
Fittings: 3H’s 200 layer random pattern Damascus spacer.
Fasteners/ pins: Gold pins, peened and polished.
3 1/2" Kitchen Knife
Type/ Style: French Profile drop point kitchen knife, 3 1/2" cutting edge, 7 1/2" OAL.
Blade: CPM 154, flat ground, tapered tang with convex cutting edge. Hand sanded to 600 grit.
Handle Material: Book matched exhibition grade desert ironwood.
Fittings: None.
Fasteners/ pins: SS Corby bolts.
6" Kitchen Knife
Type/ Style: French Profile drop point kitchen knife, 6" cutting edge, 10 3/4" OAL.
Blade: CPM 154, flat ground, tapered tang with convex cutting edge. Hand sanded to 600 grit.
Handle Material: Book matched exhibition grade desert ironwood.
Fittings: None.
Fasteners/ pins: SS Corby bolts.
6" Chef’s Knife
Type/ Style: French Profile drop point kitchen knife, 6" cutting edge, 10 3/4" OAL.
Blade: CPM-154 stainless steel, flat ground, tapered tang with convex cutting edge. Hand sanded to 800 grit.
Handle Material: Exhibition grade buckeye burl. Other handle
materials are available.
Fittings: 416 stainless steel bolsters.
Fasteners/ pins: Sterling silver pins, peened and polished.
3 1/2" Kitchen Knife
Type/ Style: Drop point with symmetrical tapered tang. Cutting edge 3 3/8", OAL 7 1/2". Typical thickness is 3/32".
Blade: 0-1-tool steel, flat ground, convex cutting edge, and hidden tang. Differentially heat treated. Hand sanded to 600 grit. Other finishes available.
Handle Material: Exhibition Grade Black Walnut and Padauk. Other handle materials are available.
Fittings: German Silver Ferrule.
Fasteners/ pins: Sterling Silver pins, peened and polished.
10" Chef’s Knife
Type/ Style: French Profile drop point kitchen knife, 10" cutting edge, 15" OAL.
Blade: CPM 154, flat ground, tapered tang with convex cutting edge. Hand sanded to 600 grit.
Handle Material: Book matched stabilized buckeye burl.
Fittings: None.
Fasteners/ pins: Sterling silver pins peened and polished.
10" Chef’s Knife
Type/ Style: French Profile drop point kitchen knife, 10" cutting edge, 15" OAL.
Blade: CPM 154, flat ground, tapered tang with convex cutting edge. Hand sanded to 600 grit.
Handle Material: Book matched exhibition grade desert ironwood.
Fittings: None.
Fasteners/ pins: SS Corby bolts.
Kitchen Knife Set
Type/ Style: Drop point with symmetrical tapered tang. Cutting edges: 3 3/8", 4 3/4", and 6 3/4". OALs: 7 1/2", 9 1/2" and 11 1/2".
Blade: 0-1-tool steel, flat ground, convex cutting edge, and tapered tang. Differentially heat treated. Hand sanded to 600 grit. Other finishes available.
Handle Material: Exhibition Grade Desert Ironwood. Other handle materials are available.
Fittings: No fittings.
Fasteners/ pins: Sterling Silver pins, peened and polished.
8" Chef’s Knife
Type/ Style: French Profile drop point Chef’s knife, 7 3/4" cutting edge, 12 1/2" OAL.
Blade: Damasteel© SS Damascus Munin pattern, flat ground, hidden tang with convex cutting edge.
Handle Material: Ancient Mammoth Ivory, Mortised to fit hidden tang.
Fittings: Jim Crowell 301 layer random pattern Damascus ferrule.
Fasteners/pins: Gold pins, peened and polished.
10" Chef’s Knife
Type/ Style: French Profile drop point kitchen knife, 10" cutting edge, 15" OAL.
Blade: CPM 154, flat ground, tapered tang with convex cutting edge. Hand sanded to 600 grit.
Handle Material: Book matched stabilized buckeye burl.
Fittings: No fittings.
Fasteners/ pins: Sterling silver pins peened and polished.
<
>
1 - 11
x
3 1/2" Hunter
Type/Style: Drop point Hunter with tapered tang. Cutting edge is 3 1/2", OAL is 7 1/2". Typical thickness is 1/8".
Blade: 0-1-tool steel, flat ground, convex cutting edge, and tapered tang. Differentially heat treated. Hand sanded to 600 grit. Other finishes available.
Handle Material: Mammoth Tooth. Other handle materials are available.
Fittings: None
Fasteners/ pins: 14 carat rose gold, peened and polished.
3 1/2" Hunter
Type/Style: Drop point hunter in the Nessmuk style.
Blade: Forged 1075 (3 1/4" cutting edge), 9 1/8" OAL, flat ground, convex cutting edge, hand finished to 600 grit.
Handle Material: Figured Walnut.
Fittings: 416 SS for the guard.
Fasteners/ pins: Sterling Silver peened and polished.
4" Hunter
Type/Style: Drop point hunter with hidden tang. 4" Blade, 3 1/2" Cutting Edge, 8 1/2" OAL.
Blade: 1075, flat ground, convex cutting edge, 600 grit finish, 58 Rc.
Handle Material: Amber dyed Sambar stag, mortised.
Fittings: 416 stainless steel guard.
Fasteners/ pins: Sterling Silver, peened and polished.
3 1/2" Hunter
Type/Style: Drop point Hunter with tapered tang and bolsters. Cutting edge is 3 1/2", OAL is 7 1/2". Typical thickness is 3/16".
Blade: 0-1-tool steel, flat ground, convex cutting edge, and tapered tang. Differentially heat treated. Hand sanded to 600 grit. Other finishes available.
Handle Material: Mammoth Ivory and 416 SS. Other handle materials are available.
Fittings: 416 SS bolsters
Fasteners/ pins: Sterling Silver, peened and polished.
3 1/2" Hunter
Type/ Style: Drop point Hunter with tapered tang. Cutting edge is 3 1/2", OAL is 7 1/2". Typical thickness is 1/8".
Blade: 0-1-tool steel, flat ground, convex cutting edge, and tapered tang. Differentially heat treated. Hand sanded to 600 grit. Matte finish. Other finishes available.
Handle Material: Exhibition grade Desert Ironwood. Other handle materials are available.
Fittings: None
Fasteners/ pins: Copper pins, peened and polished.
4 1/2" Hunter
Type/ Style: Drop point Hunter with hidden tang. Cutting edge is 4 1/2", OAL is 9 1/2". Typical thickness is 3/16".
Blade: 0-1-tool steel, flat ground, convex cutting edge, and hidden tang. Differentially heat treated. Hand sanded to 600 grit. Other finishes available.
Handle Material: Exhibition grade black Walnut. Other handle materials are available.
Fittings: 416 stainless steel guard.
Fasteners/ pins: None
4 1/2" Ranch Knife
Type/ Style: Drop point hunter with hidden tang. 5" Blade, 4 1/2" Cutting Edge, 8 1/2" OAL
Blade: 5160 forged, flat ground, convex cutting edge, 800 grit finish, edge hardened.
Handle Material: Exhibition grade, book matched, desert ironwood scales.
Fittings: None.
Fasteners/ pins: Sterling Silver, peened and polished.
4 1/2" Steak or
Bird/Trout Knife
Type/ Style: Drop point steak or bird/trout knife. 4 1/2" cutting edge, 9" overall length.
Blade: CPM 154 stainless steel, 3/32” thick. Flat ground, convex cutting edge, 59 Rc, hand sanded to 600 grit.
Handle Material: Jigged amber dyed bone.
Fittings: 416 stainless steel bolsters.
Fasteners/ pins: Sterling silver pins, peened and polished.
4 1/2" Steak or
Bird/Trout Knife
Type/ Style: Drop point steak or bird/trout knife. 4 1/2" cutting edge, 9" overall length.
Blade: CPM 154 stainless steel, 3/32” thick. Flat ground, convex cutting edge, 59 Rc, matte finish.
Handle Material: Bleached cow bone.
Fittings: None.
Fasteners/ pins: Corby bolts.
3 1/2" Hunter
Type/ Style: Drop point hunter with hidden tang. 3 1/2" Blade,
7 1/2" OAL
Blade: 1084 steel, flat ground, convex cutting edge, 800 grit finish, edge hardened.
Handle Material: Pre-ban elephant scales, mortised.
Fittings: 416 stainless steel guard.
Fasteners/ pins: Sterling Silver, peened and polished.
3 1/2" Hunter
Type/ Style: Drop point hunter in the Nessmuk style.
Blade: CPM-154, 3 1/2" (3" cutting edge), 7 1/2" OAL, flat ground, convex cutting edge, hand finished to 1,000 grit.
Handle Material: Mammouth bark ivory.
Fittings: 416 SS for the guard.
Fasteners/ pins: Sterling Silver peened and polished.
4 1/2" Hunter
Type/ Style: Drop point hunter with hidden tang. 4 1/2" Blade, 4" Cutting Edge, 8 1/2" OAL
Blade: CPM-154 SS, flat ground, convex cutting edge, 1,000 grit finish, edge hardened.
Handle Material: Exhibition grade desert ironwood scales, mortised.
Fittings: 416 stainless steel guard.
Fasteners/ pins: Sterling Silver, peened and polished.
4" Hunter Knife
Type/ Style: Drop point hunter with hidden tang. 4" Blade, 3 1/2" Cutting Edge, 8 1/2" OAL.
Blade: 1075, flat ground, convex cutting edge, 600 grit finish, 58 Rc.
Handle Material: Exhibition grade desert ironwood, mortised.
Fittings: 416 stainless steel guard.
Fasteners/ pins: Sterling Silver, peened and polished.
Hunter/Tactical Knife
Type/ Style: Drop point with symmetrical tapered tang. Cutting edge is 4 1/2", OAL 9 1/2".
Blade: 0-1-tool steel, flat ground, convex cutting edge, and tapered tang. Differentially heat treated. Hand sanded to 600 grit.
Handle Material: Exhibition grade desert ironwood. Other handle
materials are available.
Fittings: None.
Fasteners/ pins: Sterling silver pins peened and polished. Stainless steel thong hole.
<
>
10 - 14
x
11" Bowie
Type/ Style: Clip point with hidden tang. Cutting edge is 10", OAL is 15 1/2". Typical thickness is 3/16".
Blade: 5160 steel, flat ground, convex cutting edge, and hidden tang. Differentially heat treated. Hand sanded to 600 grit. Other finishes available.
Handle Material: Exhibition Grade Desert Ironwood. Other handle materials are available.
Fittings: German Silver. The three piece ferrule is file worked.
Fasteners/ pins: Sterling Silver pin, peened and polished.
10" Bowie
Type/Style: Clip point Bowie
Blade: 5160 steel, 1,4" thickness, flat ground, convex cutting edge, with hidden tang. Differentially heat treated. Hand sanded to 1000 grit with the clip at 2000 grit. 10" cutting edge, 16" OAL. Other finishes available.
Handle Material: Walrus ivory. Other handle materials are available.
Fittings: Ferrule and guard engraved and inlaid with Nitre bluing. Engraving and inlay by Steve Dunn.
Fasteners/ pins: None.
5" Boot Dagger
Type/ Style: Boot Dagger
Blade: 0-1-steel, 1/8" thickness, flat ground, convex cutting edge, with tapered tang. Differentially heat treated. Hand sanded to 1500 grit. 5” cutting edge, 9 1/2" OAL. Other finishes available.
Handle Material: Elephant ivory. Other handle materials are available.
Fittings: 416 SS bolsters engraved and inlaid with 24 ct. gold. Engraving and inlay by Steve Dunn.
Fasteners/ pins: Pins are 18 ct. gold, peined and polished.
8" Bowie Take Down
Type/ Style: Clip point Bowie, Take Down with frame handle.
Blade: O1 steel, 3/16" thickness, flat ground, convex cutting edge, with hidden tang. Differentially heat treated. Hand sanded to 1000 grit with the clip at 2000 grit. 8" cutting edge, 13 1/2" OAL. Other finishes available.
Handle Material: Ebony. Other handle materials are available.
Fittings: 416 stainless steel guard and frame.
Fasteners/ pins: Sterling silver pins, peened and polished.
5" Vest Pocket Bowie
Type/ Style: Clip point Bowie
Blade: 90 Layer Damascus, 5/32" thickness, flat ground, con- vex cutting edge, with hidden tang. Hand sanded to 600 grit and etched. 5" cutting edge, 10" OAL.
Handle Material: Pre-ban elephant ivory.
Fittings: Ferrule and guard gold inlay with fire bluing. Inlay by Steve Dunn.
Fasteners/ pins: 18 carat gold, peened and polished.
5 1/4" Boot Dagger
Type/ Style: Boot Dagger
Blade: O1 steel, 1/8" thickness, flat ground, convex cutting edge, with mortised tang. Hand sanded to 800 grit. 4 1/2" cutting edge, 9 5/8" OAL.
Handle Material: African blackwood in the coffin style. Handle is contoured so as to index in the hand.
Fittings: 416 SS bolster.
Fasteners/ pins: Pins are sterling silver.
6" Bowie
Type/ Style: Clip point Bowie.
Blade: 5160 forged by Tim Potier*, rough ground and heat treated by Jim Crowell*. I ground the false edge, finish ground the blade and and made the other parts and assembled the knife. The blade length is 6" with 5 1/2" cutting edge, 11" over all length. Flat ground and a convex cutting edge.
Handle Material: Dyed and stabilized box elder burl, mortised.
Fittings: German silver for guard and file worked ferrule.
Fasteners/ pins: Sterling Silver peened and polished.
10 1/2" Bowie
Type/ Style: Clip point Bowie
Blade: 5160 steel, 1/4" thickness, flat ground, convex cutting edge, with hidden tang. Differentially heat treated. Hand sanded to 1000 grit with the clip at 2000 grit. 10" cutting edge, 16" OAL. Other finishes available.
Handle Material: Fossilized walrus ivory, mortised.
Fittings: Ferrule and guard engraved and inlaid with fire bluing. Engraving and inlay by Steve Dunn.
Fasteners/ pins: 16 carat gold, peined and polished.
6 1/2" Bowie
Type/ Style: Clip point Bowie, 5 3/4" cutting edge, 10 3/4" OAL.
Blade: Forged 1075, flat ground, edge hardened, convex cutting edge, hand finished to 600 grit.
Handle Material: Book matched cocobolo, Danish oil finish.
Fittings: 416 stainless guard.
Fasteners/ pins: Sterling silver, peened and polished.
9" Texas Style Bowie
Type/ Style: Clip point Bowie , 8" cutting edge, 13 1/2" OAL.
Blade: Forged 1075, flat ground with a convex cutting edge. 600 grit hand sanded finish.
Handle Material: Stabilized buckeye burl, mortised.
Fittings: Guard 416 SS.
Fasteners/ pins: Sterling silver peined and polished.
12 1/2" Coffin Handle Bowie
Type/ Style: Clip point Bowie, 11 3/4" cutting edge, 17 1/2" OAL.
Blade: Forged 1075, flat ground with a convex cutting edge. 600 grit hand sanded finish.
Handle Material: Giraffe bone, mortised.
Fittings: Guard and spacer 416 SS.
Fasteners/ pins: Sterling silver peined and polished.
4 5/8" Vest Pocket Bowie
Type/ Style: Clip point Bowie, 4 1/4" cutting edge, 8 3/4" OAL.
Blade: Forged 1075, flat ground, edge hardened, convex cutting edge, hand finished to 600 grit.
Handle Material: Book matched figured walnut, Danish oil finish.
Fittings: 416 Stainless Steel Bolsters.
Fasteners/ pins: Sterling silver, peened and polished.
<
>
13 - 13
x
TAC I Tactical Knife
Type/ Style: Drop point with symmetrical tapered tang. Cutting edge is 4 1/2", OAL 9 1/2".
Blade: 0-1-tool steel, flat ground, convex cutting edge, and tapered tang. Differentially heat treated. Matte finish. Other finishes available.
Handle Material: Black paper mircarta. Other handle materials are available.
Fittings: None.
Fasteners/ pins: Stainless steel Corby bolts and thong hole.
TAC V Tactical Knife
Type/ Style: Tactical drop point double bevel.
Blade: 0-1-tool steel, flat ground, convex cutting edge, and skeletonized tang. Differentially heat treated. Bottom bevel 4 1/2", top bevel 4", 9 1/4" OAL. Matte finish. Other finishes available.
Handle Material: G10 in brown, tan, and white. Contoured with palm swells. Other handle materials are available.
Fittings: None.
Fasteners/ pins: Stainless steel Corby bolts.
TAC V Tactical Knife
Type/ Style: Tactical drop point double bevel.
Blade: 0-1-tool steel, flat ground, convex cutting edge, and skeletonized tang. Differentially heat treated. Bottom bevel 4 1/2", top bevel 4", 9 1/4" OAL. Matte finish. Other finishes available.
Handle Material: G10 in black, beige, and OD green. Contoured with palm swells. Other handle materials are available.
Fittings: None.
Fasteners/ pins: Stainless steel Corby bolts.
TAC IV Tactical Knife
Type/ Style: Tactical drop point double bevel.
Blade: 0-1-tool steel, flat ground, convex cutting edge, and skeletonized tang. Differentially heat treated. Bottom bevel 4 1/2", Top bevel 4". Matte finish. Other finishes available.
Handle Material: Circassia burl. Other handle materials are available.
Fittings: None.
Fasteners/ pins: Stainless steel Corby bolts and thong hole.
TAC V Tactical Knife
Type/ Style: Tactical drop point. Cutting edge bottom bevel 4 1/2", top bevel 4", OAL 9 1/4".
Blade Steel: 0-1-tool steel, flat ground, convex cutting edge, hardness is 58 Rc. Matte finish.
Handle Material: Black/Gray G10, contoured with palm swell. Other handle materials are available.
Fittings: No fittings.
Fasteners/pins: Stainless steel Corby bolts and thong hole.
<
>
1 - 5
x
2 1/2" Utility
Type/ Style: Drop point Utility with tapered tang. Cutting edge is 2", OAL is 5 1/4". Typical thickness is 3/32".
Blade: 0-1-tool steel, flat ground, convex cutting edge, and tapered tang. Differentially heat treated. Hand sanded to 600 grit. Other finishes available.
Handle Material: Faux Ivory. Other handle materials are available.
Fittings: None
Fasteners/ pins: Sterling silver, peened and polished.
2 1/2" Utility
Type/ Style: Drop point Utility with tapered tang. Cutting edge is 2", OAL is 5 1/4". Typical thickness is 3/32".
Blade: 0-1-tool steel, flat ground, convex cutting edge, and tapered tang. Differentially heat treated. Hand sanded to 600 grit. Other finishes available.
Handle Material: Exhibition Grade Desert Ironwood. Other handle materials are available.
Fittings: None
Fasteners/ pins: Sterling silver, peened and polished.
3 1/2" Utility
Type/ Style: Drop point Utility with tapered tang. Cutting edge is 3 1/4", OAL is 7 3/8". Typical thickness is 1/8".
Blade: 0-1-tool steel, flat ground, convex cutting edge, and tapered tang. Differentially heat treated. Hand sanded to 600 grit. Other finishes available.
Handle Material: Black Walnut. Other handle materials are available.
Fittings: Lanyard hole.
Fasteners/ pins: Sterling silver, peened and polished.
4 1/2" Steak or
Bird/Trout Knife
Type/ Style: Drop point steak or bird/trout knife. 4 1/2" cutting edge, 9" overall length.
Blade: CPM 154 stainless steel, 3/32" thick. Flat ground, convex cutting edge, 59 Rc, hand sanded to 600 grit.
Handle Material: Jigged amber dyed bone.
Fittings: 416 stainless steel bolsters.
Fasteners/ pins: Sterling silver pins, peened and polished.
4 1/2" Steak or
Bird/Trout Knife
Type/ Style: Drop point steak or bird/trout knife. 4 1/2" cutting edge, 9" overall length.
Blade: CPM 154 stainless steel, 3/32” thick. Flat ground, convex cutting edge, 59 Rc, matte finish.
Handle Material: Bleached cow bone.
Fittings: None.
Fasteners/ pins: Corby bolts.
<
>
5 - 5
x
2 3/4" Double Bladed Trapper
Type/ Style: Slip Joint, 2 3/4" Double Bladed Trapper, 6 3/8" OAL.
Blade: CPM 154, flat ground , flat ground , spey and clip point, beveled edge. Hand finished to 800 grit.
Handle Material: Bark Mammoth Ivory.
Description: Liners are 416 SS with integral bolsters and are relieved. All pins are 416 SS and German silver. The liners are file worked on the spine.
3 3/8" Sailor’s Knife
Type/ Style: Slip Joint, 3 3/8" Blade, 4 1/4" closed, 7 1/2" OAL.
Blade: Flat ground CPM-154 at 58.5 Rc. Hand finished to 800 grit.
Handle Material: Sambar stag dyed amber scales. Pins are German silver, domed and polished.
Description: Liners are 416 SS with integral bolsters and are relieved. The design is based on a Schrade Walden model 163 made from 1946-1973.
2 3/4" Swayback Jack
Type/ Style: Slip Joint, 2 3/4" Blade, 6 3/8" OAL
Blade: CPM 154, flat ground, flat ground, warncliff with Swedge. Hand finished to 800 grit.
Handle Material: Mammoth ivory. Pins are domed and Polished.
Description: Liners are 416 SS with integral bolsters and are relieved. All pins are 416 SS The liners are file worked on the spine. Engraving and inlaid with
24 ct. gold by Steve Dunn.
2 3/4" Swayback Jack
Type/ Style: Slip Joint, 2 3/4" Blade, 6 3/8" OAL
Blade: CPM 154, flat ground, flat ground, warncliff with Swedge. Hand finished to 800 grit.
Handle Material: Sambar stag, died amber. Pins are domed and
Polished.
Description: Liners are 416 SS with integral bolsters and are relieved. All pins are 416 SS The liners are file worked on the spine.
2 3/4" Trapper
Type/ Style: Slip Joint, 2 3/4" Blade, 3 5/8" closed, 6 3/8" OAL.
Blade: Flat ground CPM-154 at 58 Rc. Hand finished to 800 grit.
Handle Material: Sambar stag dyed amber. Pins are German silver, domed and polished.
Description: Liners are 416 SS with integral bolsters and are relieved. Bolsters are buffed.
3 3/8" Double Bladed Trapper
Type/ Style: Slip Joint, 3 1/2" Double Bladed Trapper, 7 3/4" OAL.
Blade: CPM 154, flat ground, flat ground , spey and clip point, beveled edge. Hand finished to 800 grit.
Handle Material: Bark Mammoth Ivory
Description: Liners are 416 SS with integral bolsters and are relieved. All pins are 416 SS The liners are file worked on the spine. Engraving and inlay by
Bruce Christensen.
2 3/4" Trapper
Type/ Style: Slip Joint, 2 3/4" Blade, 3 5/8" closed, 6 3/8" OAL.
Blade: Flat ground CPM-154 at 58 Rc. Hand finished to 800 grit.
Handle Material: Mammoth Ivory. Pins are gold, domed and polished.
Description: Liners are 416 SS with integral bolsters and are relieved. Engraving and inlay by Bruce Christensen.
2 3/4" Swayback Jack
Type/ Style: Slip Joint, 2 3/4" Blade, 6 3/8" OAL.
Blade: Mike Norris SS Damascus frequency pattern, flat ground, warncliff with swedge. Hand finished to 2000 grit, etched and buffed.
Handle Material: Elephant ivory. Pins are 14 ct. gold, domed and polished.
Description: Liners are 416 SS with integral bolsters and are relieved. Bolsters are engraved and inlaid with 24 ct. gold by Steve Dunn.
2 3/4" Swayback Jack
Type/ Style: Slip Joint, 2 3/4" Blade, 6 3/8" OAL.
Blade: CPM 154, flat ground, warncliff with swedge. Hand finished to 600 grit.
Handle Material: Sambar stag, died amber . Pins are domed and
Polished.
Description: Liners are 416 SS with integral bolsters and are relieved. Pins are 416 SS and German silver. The liners are file worked on the spine.
2 3/4" Swayback Jack
Type/ Style: Slip Joint, 2 3/4" Blade, 6 3/8" OAL
Blade: Mike Norris SS Damascus frequency pattern, flat ground, warncliff with swedge. Hand finished to 2000 grit, etched and buffed.
Handle Material: Elephant ivory. Pins are 14 ct. gold, domed and polished.
Description: Liners are 416 SS with integral bolsters and are relieved. All pins are 416 SS The liners are file worked on the spine. Engraving and inlaid with
24 ct. gold by Steve Dunn.
2 3/4" Swayback Jack
Type/ Style: Slip Joint, 2.75" Blade, 6 3/8" OAL
Blade: CPM 154, flat ground, flat ground, warncliff with beveled edge. Hand finished to 800 grit.
Handle Material: Bark Mammoth Ivory.
Description: Liners are 416 SS with integral bolsters and are relieved. All pins are 416 SS The liners are file worked on the spine.
<
>
1 - 11
x
4/8" by 3" Razor
Type/ Style: Straight Razor.
Blade: CTS-XHP stainless steel, hollow ground.
Handle Material: Elephant Ivory with paduke wedge.
Fittings: N/A
Fasteners/ pins: Stainless steel screws inlaid with gold. Bushing With .004" brass washers. Gold wedge pin, peined and polished.
<
>
1 - 1
x
3Hs is known for its Ranch knife, but also creates hunting knives, tactical knives, kitchen knives, utility knives, bowie knives, daggers, folding knives (slipjoint) and straight razors. Based in Irving, Texas, all custom knives are handmade in the U.S.A. and workmanship is guaranteed. If you are looking for that perfect knife to use in the field or want a new addition to your collection, contact 3Hs today.
"I want you to know I certainly appreciate the exquisite knife. It is by far the most beautiful knife I have ever seen, much less had the pleasure of owning. A real work of craftsmanship in every regard. I will keep and wear it proudly."
James B.
"Absolutely sensational, that 12" chef's knife. I have followed your work and greatly admire your artisanship. Awesome! One piece artworks."
Dieter H.
"I didn't realize you carved/cut the stag to draw out one-handed. It grabs perfectly. Pictures do it great justice, but actually handling it is awesome!!! Could not be happier with it. Such a great knife."
Jim M.
Raymon began making knives in 2011 at the urging of longtime friend and maker, Jim Crowell. He has had a lifelong interest in knives and began collecting custom handmade knives in 1981 when he bought three of the first knives that Jim made. In the intervening years he has collected hundreds of knives, concentrating on Jim Crowell, Steve Dunn, Harvey Dean, Don Heathcoat, Ron Newton, and Steve Woods knives.
Raymon’s first formal training in knife making was in early 2011 at Jim Crowell’s shop in Mountain View, AR. Raymon had developed a knife design, over a three year period, based on an original design of Jim’s. After the third iteration, Raymon deemed it “perfect” for general use on the ranch, in the kitchen, and in the woods. It’s known as the 3H’s Ranch Knife, by Jim Crowell. Raymon sold 17 of them and spent a week with Jim in his shop helping make them and he was hooked. He loves the knife-making process and the striving to make each knife better than the last one. It is a quest.
For as long as he is able to work, Raymon guarantees each knife against defects in workmanship, providing the knife has not been abused. He does not guarantee natural handle materials such as ivory, pearl, stag, or bone. Raymon will also re-sharpen his knives when they are returned to him with shipping and insurance prepaid.
Raymon grew up in East Texas. He received a BS in Mechanical Engineering from LeTourneau University in 1970 and an MBA from SMU in 1977. He worked for two different auto parts manufacturing corporations for over 28 years, in Texas, Indiana, and Michigan. In 1998 he and two partners started Hunt, Norton, Rodgers, LLC for the purpose of acquiring and operating small businesses. Over the next 10 years, they bought and grew three companies. The last one was sold in 2009.
March 24 - 25, 2018
Dallas Market Hall
2200 N Stemmons Fwy
Dallas, TX 75207
September 28 - 30, 2018
International Custom
Cutlery Exposition
Kansas City Marriott Downtown
200 W 12th St
Kansas City, MO 64105
3Hs Knives
Custom handcrafted knives